Embed Frames
- Brand:
- Type:
- Price: RMB
- Promotion: RMB ( 0 Customers Bought)
Embed Frames
Embed frames cast into concrete floors and substructures serve a multitude of purposes that extend the effective life of your completed construction project. Frames form a rigid shield for concrete lead edges and perimeters which are subject to cracking and chipping when left unprotected.
During construction, these rigid (1/4" minimum thickness) frames expedite forming and provide a welded structure that assures accuracy in the concrete pour. Frames provide a uniform bearing surface for the grates or covers, often eliminating rocking or irregular elevations experienced with grates or covers installed directly on poured concrete.
When you specify Grating Pacific embed frames you are specifying durability, accuracy, and economy.
Nail holes are optional and may further expedite installation. If desired, size and location of nail holes shall be indicated.
Grating Pacific E-Z Pour frames are designed to expedite forming and provide superior concrete embedment. Assembled with continuous anchors on the non-bearing sides, E-Z Pour frames install quickly and provide superior drainage.
All frames are available in four sided, one piece, welded construction units that can accommodate any clear opening. Frame sections shown below illustrate the various configurations for edge protection. Simply specify the frame type, desired clear opening ("W" and "S" dimensions), and desired grating or cover thickness.
Frame Sections
Anchors
All frames are provided with 3/8" x 4" headed concrete stud anchors welded within 6" of each end and at a maximum of 24" on center. Alternative anchor sizes and spacings may be designated by the specifying authority.
Materials & Finishes
Carbon steel frames are manufactured with one of three standard finishes, bare steel (no finish), painted, or hot dip galvanized after fabrication. Aluminum frames are provided mill finish and can be specified with bituminous coating on surfaces to be cast in concrete. Stainless steel frames are supplied mill finish and can be specified as abrasive blasted after fabrication to provide a uniform matte finish.
Frame Specifications
